We have been reading Eggs for the Hunting, by Reg Down, which we got from A Toy Garden. I was inspired by Reg’s drawings in the book and I wondered if I could emulate them on some wooden eggs (also from A Toy Garden) to make my own story eggs. I had seen story eggs made by Mama West Wind who writes at Chocolate Eyes, and they were so beautiful I had to try to make some myself. (You can find a full tutorial by Chris Willow how to do this here at Rhythm of the Home.)

This seemed the perfect time to try the wood-burner for the first time. Plus, I had this nifty, super-dandy lathe thingy that Ian bought me for Christmas to try out, so a little project was born.

My first wood-burning attempt. I dig it! I used the pointiest tip and was pleased with the results.

I painted the flowers with some watercolor paints. I liked being able to see the wooden egg, so I left the natural wood.

Emboldened by my first success, I tried one of Reg’s designs on this large wooden egg.  This was trickier. It felt important not to mess it up. I just worked slowly and took lots of deep breaths while using the wood-burner.

Then I painted it with Stockmar watercolors. The illustration I was emulating is in black and white, so the colors here are my interpretation.

I finished it with a nice coat of beeswax furniture polish.

My Tiptoes Lightly isn’t perfect, but I think she’s a fine first attempt. I hope to make more of these story eggs before Easter comes. My kids haven’t seen this egg yet and I’d love to have two finished for their Easter baskets.

Since we had some smaller wooden eggs, too, I let the boys paint them.

What fun things are you doing to enjoy Easter?

This year I decided to try a product called Eco-Eggs. I bought it from A Toy Garden, which is my favorite place to buy Waldorf and sustainably made, fair trade gifts and art supplies. Eco-Eggs is a egg dye kit made from natural pigments. The dyes are made using natural plant, fruit, and vegetable extracts from annatto seed, curcumin, purple sweet potato and red cabbage.  This kit includes three natural dyes (orange, blue, and purple).

We simply followed the instructions. It was that easy.

Pour the dye powder into a half cup of water and mix thoroughly until it is all dissolved.

Gently add your eggs so they don’t crack on the bottom of your glass. This time we used all white eggs. But I’ve saved our dye baths and plan to try them on our brown eggs as well.

The kit comes with three colors of natural dye and this handy chart tells you how to get other colors, including how long to leave your eggs in the dye to achieve your desired result. Some colors are made by just dipping the egg in for a second and then removing it, as in the case of yellow. Others are achieved by leaving the egg in as long as 15 minutes.

My kids rarely have the patience to leave one egg in a dye bath for 15 minutes, as is recommended on some of the color formulas. But we’re really happy with our colors. Lucas enjoyed dipping eggs into two colors to make three-toned eggs. Asher really liked using his rainbow crayons on the eggs before dyeing them.

It always seems like 18 eggs is plenty to dye before we get started. But dyeing Easter eggs is so fun that it seems like we run out of eggs way too quickly. If you’re short on time this year, this Eco-Eggs product will work well for you, without using a lot of commercial chemicals in the process.

Aren’t they pretty? We get to hunt for these beauties tomorrow, as we’re celebrating Easter with one side of the family a week early. xo

I have a deep and abiding love for mobiles. Holiday decorations that hang can be very festive without taking up too much space or cluttering your nature table. Here’s a St. Patrick’s Day leprechaun mobile that is easy to make and quite whimsical.

Materials

• foam base and needle-felting needle
• wool roving in gray or black, green(s), and skin colors
• low-temperature glue gun and glue sticks
• one twig approximately 18 inches long; ideally it will have a 6-inch straight section in the middle
• gold ribbon, gold foil, or gold tissue paper
• 1-inch ribbons in rainbow colors, approximately one yard of each color
• yarn or string, approximately 2 yards
• needle, thread, and scissors

Money-Saving Alternatives

• Narrower ribbon in rainbow colors costs less. Although I used 1-inch ribbon, you could use several strips of the same color ribbon to create a 1-inch band of color for each color of the rainbow.
• Instead of 1 yard of each color, you could use only a half yard. Your ribbons would be a single layer, not double as in the photos below.
• Check your gift wrap stores. You may have some gold tissue paper or ribbon left over from a package.

Tutorial

To begin, tie two pieces of yarn or string (each about a yard long) to your twig, approximately 8 inches apart. Hang the twig from the two strings more or less horizontally (adjust the position of the two ties on the twig as needed). Then tie a knot in the two strings about 8 inches up from the twig. This will make a triangle of string above your twig. Tie your twig to something so that it hangs freely at shoulder level so that you can work on it comfortably.

Lay your ribbons over the twig in rainbow order. Their two ends should be even at the bottom. Make sure you like the position of each ribbon before you affix any glue. (You can use clothes pins to hold them in place while you decide on their optimal positions.)

With your glue gun, put a dab of glue on the inside of one layer of a ribbon and pinch the other layer over the top of the warm glue to fix the ribbon to itself. Repeat this for each color. See the photo above.

Now, take your gray or black wool roving, felting needle, and foam pad and needle-felt a pot. This will be your pot of gold. Mine was about 2 and ½ inches in diameter. If you wish to have a sleeker look for your wool pot, you can first shape it with your felting needle, then wet-felt the pot in hot water with soap. Gently rub your pot inside and out with soap until the fibers mat firmly together. Rinse it in both hot and cold water.) Shape it carefully into a pot and let it dry. You may still want to apply your needle again to perfect the pot’s shape.

With your green and skin-colored wool roving, needle-felt a leprechaun. No wire skeleton is needed for this project and since this figure will not be played with, you can attach head, hands, legs, shoes, and hat by simply needling the fibers together. Start with a torso and arms. Add legs. Add a ball of skin-colored wool for a head.

Your leprechaun can be as traditional or as unique as you like. Mine was a kind of Waldorf-inspired figure dressed in several greens, with a jaunty hat and dark green vest.

Stand your leprechaun on top of your horizontal twig. With needle and thread, sew your leprechaun’s hands to the yarn or string hanger. (Feel free to adjust the knot above the leprechaun‘s head as needed to make it possible for the hands to hold both strings.) Finish off the two yarn/string knots on the twig by tying them securely and cutting off the excess.

When your pot is dry, crumple your gold ribbon, foil, or tissue paper into a mound of gold and place it into your pot. You might want it to heap above the edge of your pot. With a long thread, sew up from the bottom center of your wool pot, through your gold, and back down a couple of times. On the way up again, extend your long thread all the way up to your rainbow-covered twig and tie your thread securely to the center of the twig. You’ll probably want to tie it in between the yellow and green ribbons. Cut of the excess thread tail. Your pot of gold should hang a couple of inches below your twig, at the end of your rainbow.

Find a nice spot in your home to hang your St. Patrick’s Day mobile with leprechaun and pot of gold, perhaps in front of a window, where fresh spring breezes will make your rainbow ribbons flutter.

* This article was originally published in the Little Acorn Learning March Enrichment Guide.

Are you excited about Saint Patrick’s Day? I am because we can do anything we want to celebrate. I’m a big fan of “minor” holidays for this reason. We can be creative and silly and spontaneous, and even do something different every year, if we want.

I thought I would share this with you. I made up this shamrock window transparency, building on what I’ve learned from Magical Window Stars by Frédérique Guéret. Although there is a beautiful clover leaf design in the book, this is not it. This design that I’ve created uses the square kite paper that is most commonly available. The basic point I teach below is Guéret’s invention, but the configuration and the assembly of the shamrock was my idea. I hope you like it. In any case, I fully recommend this book if you love window stars like I do.

Materials

• 7 sheets of square kite paper in dark green
• scissors
• glue stick
• tape
• ruler or straight edge for making crisp folds

Tutorial

Fold your square into diagonals.

Now fold opposing corners to the center line (photo above). The top is now a horizontal fold that is parallel to your horizontal crease.

Unfold the bottom corner; the crease you made will be used later. From the top, folded edge, fold the right side down to meet the center horizontal line (photo above).

Do the same to the other side. Now you have a point at the top again (photo above).

Fold the bottom corner up to the horizontal crease line (photo above).

Now fold both sides in to the center vertical crease. This step looks like an airplane or maybe a sailboat. Do your best to keep the top point crisp.

Open those sides out again.

Now fold the bottom sides up so that the flat bottom edge aligns with the center vertical crease (photo above). Unfold those bottom sides again.

Now fold the left top side in again, allowing the corner to touch the horizontal crease you made in the previous step. Your top point is becoming more acute.

Above is a detail of this step. See where the left edge folds in and meets the crease? The corner touches the horizontal crease.

Now do the same with the right side.

Open out the innermost flaps of the top point, allowing their “wings” to extend beyond the edges of the sides.

From the bottom center, you have two diagonal creases. Fold the very bottom edge on both sides up, aligning the bottom edge with the diagonal creases.

This photo above is a detail of that final fold. Congratulations! You’ve make one point. Now— sorry about this part—you repeat that process five more times, so that you have six of these points. Two points will make one lobe of your shamrock.

Once you have six of those points, you can make the stem. Take another square of kite paper and fold and cut it in half. Now fold and cut piece in half again and cut along the fold. You should now have a skinny, rectangular strip that is one-quarter the width of the original square.

This long strip is the stem of your shamrock. Fold the bottom of the strip like the photo above.

And fold the top of the strip in the opposite direction, like so. This makes it kind of curve. You now have all the pieces you need and you can assemble the shamrock window transparency.

For each lobe of the three-lobed shamrock, you’ll need two points. The sharpest point—what I was calling the top in the photos above— goes in the center. The front side of each piece is the side with the points. If you run your fingers across the front, they will catch on the little triangles created in the folding process. The back side is smooth; your fingers won’t catch on any part. Turn one of the two points over so that the back side is up, as in the picture above. Run your glue stick along the right edge (where the glue end of the glue stick is in the photo above).

Align the points at the bottom as close together as you can, hold your two points up to the light, and align the darkest edges side by side, as you see in this photo above. They make a very dark upside-down triangle in the middle. The broad (formerly bottom) end of your two points will be overlapping. You now have one lobe of your shamrock done. Do the same thing two more times to make two more lobes of your shamrock.

If it helps, hold up each lobe to the light before gluing them together. You should see a medium green triangle in the center when all three points are aligned. Now put all the center points together on top of your stem. Glue them to the stem with your glue stick so that the points of the center are just barely touching and the three lobes are almost touching halfway up, just beyond the edge of that inner triangle. The stem should extend down in the gap between the left and right lobes of the shamrock.

Now you can hang your shamrock in the window. Make three or four loops of tape and put at least one on the back of each lobe to stick it to your window. Perhaps your window shamrock with bring you good luck!

The Dear Little Shamrock

There’s a dear little plant that grows in Ireland.
‘Twas Saint Patrick himself sure that set it.
And the sun on his labor with pleasure did smile.
And a tear from his eyes oft-times wet it.
It grows thro’ the bog, thro’ the brake, and the mireland,
And it’s called the dear little Shamrock of Ireland.

That dear little plant still grows in our land,
Fresh and fair as the daughters of Erin,
Whose smiles can bewitch, and whose eyes can command,
In each climate they ever appear in:
For they shine thro’ the bog, thro’ the brake, and the mireland,
Just like their own dear little Shamrock of Ireland.

That dear little plant that springs from our soil,
When its three little leaves are extended,
Denotes from the stalk we together should toil,
And ourselves by ourselves be befriended.
And still thro’ the bog, thro’ the brake, and the mireland,
From one root should branch, like the Shamrock of Ireland.

—Andrew Cherry

Or, What I Did on My Vacation

OK, I admit I’m completely obsessed with window stars lately. I think I mentioned that here a little while ago. Anyway, we had some time off last week and I took all my kite paper and window star books along with me to the mountains. I was determined to challenge myself to make some of the more complex stars. While I was there, in between working, eating, and playing outside, I made eight new stars.

I also accidentally wrecked one, but shed only a few tears about that.

The more you make them, the easier it becomes. I guess I got into a kind of flow.

Lucas helped me make this beautiful multicolored star. He did most of the white center. I’m hoping he’ll want to make some more with me. I think stars like these may be our birthday gifts for everyone this year.

I love the way the light shines through them and I confess I’m crazy about the colors.

My boys wanted one for their room in their favorite colors, blue and green. Now that we’re home again, the stars have all found spots on our windows here, sharing space with the Valentine window transparencies I made last month, which are still up because I adore them.

I’ve also been experimenting and will share my results very soon, if it all works out the way I think it will.

We were on a school vacation last week, and Ian carved a few days off his work week. So we were able to leave town for one of our delicious, infrequent snow vacations.

We had a new family member along with us this time. I fell even more in love with Solstice. What an intrepid snow dog he is!

I love to see my children roaming, to see them march off on their own mission in whatever direction they choose. I love to see them free.

We had plenty of time for games and new hobbies, and that was enchanting, too.

What more can I say? It was perfect.

—Painting by Edith Holden, naturalist, artist, author, and art instructor (1871-1920)

Well, hello March. It’s been so long, and I’m delighted to see you back again. February and I don’t get along as well as I would like, but we’re making progress and our relations are more comfortable in recent years than they used to be. But you, March. You are lovely, a breath of potential that stirs me up and fills me with a yearning for adventure and romance.

Spring Signs

Everywhere the wind blows

There goes spring—

Red kites and blue kites

Are tugging at the string.

Walks have hardly dried

Until marbles roll about

Long before the colored flowers

In the fields are out.

Maybe there is frost yet

And a touch of snow,

But there are little spring-signs

Where the children go.

—Mildred Bowers Armstrong

Happy Valentine’s Day from our family to yours.

You can find this post also on Homespun Waldorf’s Winter Carnival

Hello! [This post has been edited to remove a broken Pinterest link. 2-13-15]

Anyway, I’m kind of obsessed with window stars lately. I got some new supplies for Christmas (kite paper and a new book and paper kit for making window stars). They are challenging for me and so rewarding when you get it right. I made a ten-pointed star the other day and I had to enlist Ian’s help to get the angles right when assembling the points. Then we had to buy a protractor!

This eight-pointed star I made is new.

And I accidentally-on-purpose bought this rose window transparency from an 11-year-old kid on Etsy, a shop named Knitting Momma. I couldn’t help myself. It’s so pretty and I like the gnome head shapes within it. See them? (Pay no attention to my dirty windows.)

And that got me experimenting with my kite paper. I made this transparent window valentine using three pieces of square kite paper, two red and one white. I like this one a lot. The kite paper is only 6.25 by 6.25 inches, and I wondered if I could do something similar but bigger with tissue paper.

Now, I wouldn’t say my valentine window transparencies are perfect, but we learn in the doing, right? So here is what I did, and what I learned along the way, in case you would like to play along.

Materials

• tissue paper or kite paper in valentine colors (red, pink, dark pink, white, purple)
• scissors
• iron on medium heat and ironing board
• glue stick
• tape

Tutorial

First, lay several pieces of tissue paper of different colors on top of each other. Iron them flat on your ironing board with the heat on medium. Any wrinkles should iron out nicely. Do not spray with water while ironing.

Then, with your papers still stacked, fold it once in half and then in half again. You should now have four stacks of tissue paper. Take one stack, fold it in half, and cut out a big heart shape. Iron out the center crease. Separate the hearts that you’ve just made. They are pretty much the same size, so they can be stacked up again in layers as you make your designs.

Try cutting one heart into smaller hearts by cutting along the heart’s edge. You’ll end up with two usable pieces: the smaller heart and the heart-shaped edge with an open center. Do this a few times and also cut additional hearts out of the scraps from the big hearts.

Take one large heart layer and fold it into quarters or eighths, like you would if you were going to cut a paper snowflake. Along the main fold line, cut a small half heart. When you unfold, you’ll have four or eight cut out hearts. Be careful about where you’re cutting, as it’s easy to cut beyond the border of your heart since it’s not a symmetrical shape. This heart transparency shows the four small cutouts. (While it’s folded, you can cut additional shapes such as diamonds or triangles if you wish, like you would for a snowflake.)

Try folding one layer in half and cutting a simple design. Here is one with tulips.

Now play with the layers you have made. Put a whole heart on the bottom and start stacking other layers. Arrange them in a pleasing way, mixing the colors as you like. Hold them up to the window or a lamp to see how the layers affect each other when the light shines through them. The more layers you have, the darker the shapes will seem. You can also put layers on the back of your heart.

Keep in mind that you want the valentine window transparency to look nice both when the sun shines through it during the daylight, but also when it’s dark outside, when the interior light of your home will shine on the front of the heart.

When you have the papers arranged the way you like them. Use a small amount of glue from your glue stick to stick the layers together—and be very gentle because the tissue paper rips easily. Try to keep the outer edges lined up precisely. Gently add dabs of glue until all the layers seem sandwiched together. Now iron the valentine window transparency flat again. You can use a small dab of glue stick glue to stick the transparency to the window, or use tape.

You most likely have small hearts leftover from making the big ones. You can make small transparencies as well. The smaller the valentine transparency, the simpler your design will probably be. Several sizes look great all together, I think.

This Magical Window Stars book is terrific. Many of the designs are very complicated, which is a thrill for me. Maybe I’ll work up to them. The book has many star designs that require rectangular papers. In the meantime, you can find a wonderful free tutorial on folding a simple window star here at GardenMama’s blog.

This Origami Suncatchers kit is the one I got for Christmas. It contains the kite paper, a book of 20 star designs, and a glue stick. I find the instructions and photos in this kit to be easy to follow.

A Toy Garden sells both square and rectangular kite paper. This shop is where I buy lots of gifts for my children. A Toy Garden also sells the Magical Window Stars book and a book about rose windows called Rose Windows and How to Make Them.

And finally, if you want to purchase window stars, I recommend peeking in the Etsy shop of Harvest Moon by Hand. Ann is the best at making window stars. Her work is stunning.

Happy Valentine’s Day to you and your loves!

I made these fun valentine stones for my guys last year. They’re better than sweets, in my opinion (my kids might disagree). They are very simple to make, but require a little time for drying, so give yourself a day or two.

Materials

* flat stones from your yard or the craft store (any color)

* tiny fabric scraps in valentine colors (you decide)

* mod podge glue and a paint brush

* sharpie pen

Tutorial

Wash your stones and let them dry completely. Cut out small hearts from tiny fabric scraps. I admit that if you’re a quilter, you have advantage in the scraps department. Cut hearts that will fit on your stones; you may be surprised at how small they need to be—of course, this depends on your stones. For myself, I had stones of varying sizes and I like the variation.

Dab some mod podge on your stone, then place your fabric heart on it. With your paintbrush, coat the entire top of the stone with more mod podge. Smooth out any wrinkles in the fabric heart. Set it aside to dry for several hours or overnight.

Repeat as many times as you like! Frankly, I think these valentine stones make a big impact when you have lots of them.

When the tops of your hearts are dry and shiny from the mod podge varnish, turn them over. Write a word or brief message on the other side of the stone with your sharpie pen. Remember the chalky valentine heart candies? What are those called? Conversation hearts?

If you or your child is giving these stone valentines as special gifts to friends or teachers, stock messages like “Be mine” work great. If you are making these for your family, you can get more personal. For example, I also used phrases like “I’ll always love you,” and “I’m so proud of you,” and “All we need is love.” Make a special valentine stone for each member of your family, with a message just for them. You know what they need to hear!

Do you have a meaningful family joke? A lyric to your family’s favorite song? A family motto or mission statement? Any of these would be perfect for your custom valentine stones.

Finally, paint the writing side of each stone with mod podge, too. This will give the stone a finished appearance when it dries.

Now arrange the valentine stones artfully for Valentine’s Day, or wrap them as a Valentine’s gift. Your family will have fun holding the stones and turning them over to read all the messages. Mine did!

Happy Valentine’s Day!